A construction project needs to compulsorily follow certain procedures at a given time frame. A construction to do list helps in ensuring that these tasks are carried out without any delay. This, in turn, helps in the completion of the project on time and without any disturbance during the construction process.
This section should ideally feature activities like a check on the type of materials bought and if they are suitable for the terrain. Also, the plan should be in place and a final check should be done. Another area that needs to be mentioned is to make sure if all the safety measures are in place.
All details regarding excavation, footings and foundations, drainage and underground plumbing, scaffolding and concrete slabs need to be noted down. Stability and positioning should be reviewed and also, materials that need to be waterproofed must undergo the process at this stage.
When the construction work reaches this phase, one must be more careful because there is a tendency to overlook certain factors since the work is reaching the middle phase. The Building Act should be understood properly and then each department should be analyzed, especially because it is difficult and chaotic to change things later.
There are too many guidelines to be reviewed here, so one must take care not to miss any of them. Roofing positions and its position in correspondence with other areas should be checked. Windows, door, gutters and downpipes should be allocated according to the plan. Regarding insulation, lighting, phone and broadband wiring, the necessities should be discussed with the electrician.
Though this seems like a phase where everything is relaxed in nature, there are a lot of points that require attention and double-checking. Since this can be considered as the last phase, it is important to see if everything matches with the overall appearance.
The construction checklist template is present in a tabular form and is quite easy to use. The first column of the table consists of the list of tasks that need to be done. The second column describes each task in brief. The third column features the person responsible for the task and there is an additional column to note down the remarks.
The maintenance checklist template features just one table and focuses on the integral part of building maintenance. The table is divide into four. The first column contains the names of the inspection points whereas the second column is to note down inspection details. The third column denotes the frequency and the fourth column is dedicated for comments.
This inspection checklists template is available only in Word format and has 25 different categories. Each category features a construction requirement or task. A table with five subdivisions is available for each of them. Specifications like the reference number, criteria, observations, ratings, demerits and CAN details are noted in the table.
printable checklist template consists of all details like different materials, processes, tasks, etc. and the user can mark if the specified detail is required at the worksite or not. Below each category, certain questioning pertaining to it can be found and options are available alongside to choose and mark Yes, No or don’t know.
This construction checklist template is formulated to be used in case of identify, review and correct any conditions that can prove hazardous to the people associated with the construction work or the general public. The main feature of this template is a table that is divided into three columns. The task or condition is described in the first column. The checkbox is given in the second column and the third column is dedicated to actions that need to be addressed.
This project checklist template consists of checklists for various areas of construction like earthworks, pavements and shoulders, stabilization, miscellaneous concrete works, etc. Therefore it encompasses a whole construction project. The user will see that the page has been divide into two (witness point and hold point) for each phase. Witness point describes when the inspection is done whereas hold point gives details about the supervisor’s approval.
This construction checklist template features details in tabular form. The table consists eight columns of which five are to mark the user’s opinion. The other column showcase the serial number, item and comments. The columns to mark the opinion are named as N/A, Applicable, Actioned, In progress and Complete.
The checklist template looks very simple, neat and professional. It is designed in the form of a table which has three columns. The first column is for the topics of the checklist, the second one tells the reader what department does a specific task belong to and the third column is for remarks.
The FCC construction checklist template can be used for large projects where the general contractor is in need of a checklist and also for build-it-yourself projects one might be interested in. It consists of two separate sets of questions for this purpose. The user can make use of the column provided beside the question to mark a task as done.