Building Drainage Checklist
Prepared by: [Your Name]
Company: [Your Company Name]
Date: [Insert Date]
1. Planning and Design
Checklist Item | Completed? | Comments |
|---|
Assess site topography for natural drainage flow | | |
Design roof drainage system (e.g., gutters, downspouts) | | |
Plan for subsurface drainage (e.g., French drains, trench drains) | | |
Ensure compliance with local drainage codes and standards | | |
Design sewer connections for wastewater disposal | | |
Plan for stormwater management system (e.g., retention basins) | | |
2. Material Selection and Sourcing
Checklist Item | Completed? | Comments |
|---|
Select materials for drainage pipes (e.g., PVC, cast iron) | | |
Choose appropriate gutter and downspout materials. | | |
Source catch basins, grates, and trench drains | | |
Ensure all materials meet local code requirements. | | |
Obtain backflow prevention devices as needed. | | |
Select appropriate sealants and connectors for water tightness. | | |
3. Installation of Drainage System
Checklist Item | Completed? | Comments |
|---|
Install roof drainage system (gutters, downspouts) | | |
Set up subsurface drainage (e.g., French drains, gravel beds) | | |
Connect downspouts to storm drains or surface drains. | | |
Install catch basins at key points for water collection. | | |
Lay drainage pipes with a correct slope for optimal flow | | |
Test connections for water tightness and proper drainage flow | | |
4. Site Drainage and Landscaping
Checklist Item | Completed? | Comments |
|---|
Grade site to divert water away from building foundation | | |
Install surface drains in areas with high water flow potential. | | |
Integrate landscaping to help with natural water absorption. | | |
Ensure proper installation of sump pumps (if required) | | |
Use erosion control measures (e.g., geotextiles) | | |
Ensure that surface and subsurface systems are coordinated. | | |
5. Inspection and Testing
Checklist Item | Completed? | Comments |
|---|
Inspect installed drainage pipes for correct alignment | | |
Test all drains and downspouts for proper water flow. | | |
Confirm no blockages in any part of the drainage system. | | |
Check for leaks at joints and seals. | | |
Test sump pumps and other backup drainage systems | | |
Inspect backflow prevention devices (if applicable) | | |
6. Final Compliance and Maintenance Preparation
Checklist Item | Completed? | Comments |
|---|
Verify system compliance with local codes and permits | | |
Provide a maintenance plan and schedule for the drainage system. | | |
Ensure access points are in place for future cleanouts. | | |
Document all drainage installations and system layout. | | |
Schedule periodic inspections post-installation | | |
Educate building occupants on drainage maintenance. | | |
Checklist Templates @ Template.net